All Fassa Bortolo sealants used to fill joints between ceramic tiles and stone materials meet the requirements of EN 13888. All Fassa Bortolo joint sealants used to fill non-structural joints meet the requirements of EN 15651-1, 15651-2, 1561-3 and 15651-4. The colours reproduced are purely indicative and may vary for reasons due to printing, reproduction and conversion of the images. It should also be noted that colour rendering is affected by several other factors, including, by way of example: natural light, which is not uniform or constant; artificial light, affected by the colour temperature of the light source or CCT - Correlated Colour Temperature; and the colour of adjacent surfaces. The display of colours by computers is also affected by the user’s display settings. For a more meaningful colour match, refer to the grouting samples provided in the colour chart. In any case, the final colour obtained on site will depend on the processing, application and cleanliness of the sealant and the type and colour of the tiles adjacent to the joints, and may also be subject to changes over time, including for reasons relating to environmental conditions (humidity, light, etc.). For all of these reasons, Fassa Srl offers no guarantee whatsoever relating to the colour of Fassa Bortolo sealants and the product’s correspondence to the images and samples provided, as well as to the final result obtained on site, declining all liability pertaining to this attribute.